Peptide calculator: concentration & dilution
Calculate peptide concentration in mg/mL, convert a defined research portion from µg to mL, or work out a stock dilution with C₁V₁ = C₂V₂. Use your own documented inputs; these worksheets do not choose amounts or confirm that a preparation is suitable for use.
Start with the solution
Record total peptide mass and final measured volume.
Define a research portion
Enter an amount from your own validated procedure.
One portion, in context
Enter a positive mass and final liquid volume to begin.
Concentration = mass ÷ final volume. Portion volume = portion mass ÷ concentration. U-100 units = volume in mL × 100.
Peptide dilution calculator
Start with a solution of known concentration. Enter the target concentration and final volume; units are converted before applying C₁V₁ = C₂V₂.
Enter both concentrations and the final volume to calculate a dilution.
*Additional volume assumes additive liquid volumes, complete mixing and no analyte loss. Verify final volume with a validated method. This worksheet does not select a liquid, establish compatibility or provide preparation or dosing instructions.
For a detailed unit-by-unit explanation, read our peptide reconstitution math and common errors guide.
How the arithmetic works
Divide peptide mass (mg) by final liquid volume (mL) for concentration in mg/mL. Convert a selected portion from µg to mg when needed, then divide that mass by concentration for its volume in mL. The number of complete portions is the total mass divided by portion mass, rounded down; handling loss is not included.
The optional U-100 scale converts volume only: 100 markings correspond to 1 mL, so the calculated volume in mL is multiplied by 100. These markings are different from a peptide’s mass or International Units. The scale shown here is illustrative; actual devices differ. See the U-100 labeling on DailyMed for the underlying volume convention.
A worked laboratory example
If a preparation contains 8 mg in a final 4 mL, its calculated concentration is 2 mg/mL. A preselected 200 µg research portion is 0.2 mg, equivalent to 0.1 mL or 10 U-100 volume markings. The initial mass would contain 40 complete theoretical portions before transfer or measurement loss. These are example inputs, not suggested amounts.
How to calculate a peptide dilution
Reconstitution starts with a material and a final solution volume. Dilution starts with an existing solution of known concentration. For an ideal dilution without analyte loss, C₁V₁ = C₂V₂: stock concentration × stock volume = target concentration × final volume. Both concentrations must use the same unit before the calculation. The dilution worksheet above converts mg/mL and µg/mL automatically.
For a 2 mg/mL stock and a 200 µg/mL target in a final 5 mL, convert 200 µg/mL to 0.2 mg/mL. The stock volume is (0.2 ÷ 2) × 5 = 0.5 mL. With additive volumes, the additional liquid volume is 5 − 0.5 = 4.5 mL. The stock contributes to the final 5 mL; it is not added to another 5 mL. This is an arithmetic example, not a preparation protocol.
A target above the stock concentration cannot be reached by dilution alone. The formula also cannot select a compatible liquid or account for precipitation, adsorption, degradation, transfer losses or non-additive volumes. Confirm the procedure and final volume independently.
Why final volume matters
The mass in a container stays the same when liquid is added, but the concentration changes. For an 8 mg sample, a 2 mL final volume corresponds to 4 mg/mL; a 4 mL final volume corresponds to 2 mg/mL. The same selected portion therefore occupies different liquid volumes. Enter the measured final volume when it is known rather than assuming that it always equals the liquid added.
Concentration arithmetic does not select a diluent. Compatibility depends on the specific material, formulation, container, and validated procedure. The worksheet uses volume as a number and cannot judge whether a liquid is appropriate, whether mixing is complete, or whether the resulting solution remains stable.
Reading the scale and the portion count
The 30-, 50-, and 100-unit options change the capacity shown in the visual ruler. They do not change the underlying conversion: 0.1 mL remains 10 U-100 volume markings on any of those scales. If the selected portion is larger than the displayed capacity, the worksheet flags it. The bar is an illustration, not a representation of a specific syringe or its graduation accuracy.
“Full portions available” divides the initial peptide mass by the selected mass per portion and discards the remainder. It assumes an even concentration and complete recovery. Residual material, dead space, transfer loss, and measurement error can reduce the amount actually recoverable. The optional duration divides that theoretical count by the selected frequency; it is not a prediction of usable shelf life.
Keep the inputs with the result
State whether the mass came from a nominal label or a measured content result. A chromatographic area percentage is a different quantity; the HPLC purity versus peptide content guide explains why it cannot automatically correct the mass input. Save the inputs and their sources with the research record template so another reader can check the calculation.
What the calculation cannot establish
The result cannot verify identity, purity, solubility, sterility, stability, diluent compatibility, or real-world measurement precision. It cannot determine a human dose or provide administration guidance. A frequency setting only divides the theoretical number of portions over time; it does not establish a storage period.
Frequently asked questions
What is the difference between reconstitution and dilution?
Reconstitution describes making a solution from a material; dilution lowers the concentration of an existing solution. The first worksheet uses mass ÷ final volume. The stock-dilution worksheet uses C₁V₁ = C₂V₂ with a known starting concentration.
Is peptide purity the same as concentration?
No. A chromatographic area percentage and a mass-per-volume concentration describe different quantities. Use a documented mass or concentration input; a high purity percentage cannot supply it. Read the peptide purity versus concentration comparison for worked examples.
Does adding more liquid change the total peptide mass?
No. With the same mass, a larger final volume lowers concentration and increases the liquid volume corresponding to a fixed portion mass.
Can I convert µg directly to mL?
Only when the solution concentration is known. Convert µg to mg, then divide by mg/mL to obtain mL.
Are U-100 markings the same as International Units?
No. In this worksheet, U-100 markings describe a volume scale. International Units describe biological activity for certain substances and need a substance-specific standard; they cannot be inferred from this volume conversion.
Does the calculator tell me how much liquid to add?
No. The preset buttons are quick ways to enter a volume for comparison. They are not formulation instructions. Use a validated procedure for the material, then enter the resulting final volume.
Why does the selected U-100 scale matter?
It changes the displayed capacity and visual comparison, but not the calculated volume or scale-unit number. A result that exceeds the selected scale is flagged. This tool does not assess the suitability or precision of a physical device.
For context on verifying a measurement, read how to read an analytical method. To document inputs and assumptions, see building a traceable research record.